Dell OptiPlex GX260 User Manual

Page 71

4 notch
5 securing clips (2)
6 memory connectors on system board

2. Align the notch on the bottom of the module with the crossbar in the connector.

NOTICE:

To avoid damage to the memory module, press the module straight down into the socket with equal force

applied at each end of the module.

3. Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the

connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.