Installing an agp/dvi adapter card – Dell OptiPlex GX260 User Manual

Page 100

1 card-clip lever 3 slot connector
2 card clip

4 card slot

Installing an AGP/DVI Adapter Card

1. To add or replace the card, gently press it down into the slot connector until it clicks into place.

2. Release the card-clip lever, ensuring that the tab on the card-clip lever fits into the notch on the front end of the card.

3. Secure the card by lowering the hinged lever on the back panel.

4. Close the computer cover.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack, and then plug it into the

computer.

5. Connect the monitor cable to the card's video connector.

6. Connect your computer and devices to electrical outlets, and turn them on.