Dell OptiPlex GX260 - Manual (Page 38)

Floppy Drive
CAUTION: Before you perform this procedure, see " Precautionary Measures ."
Removing a Floppy Drive
1. Disconnect the floppy-drive cable from the system board connector (DSKT).
2. Remove the power cable from the interposer board.
3. Disconnect the CD/DVD drive cable and the power cable from the CD/DVD drive.
4. Remove or raise the drive by pressing the green tabs on either side of the drive and lifting the drive up.
5. Remove the floppy-drive cable from the floppy drive.
a. Remove the interposer board from the floppy drive by pressing the tab and rotating the interposer board.
Removing the Interposer Board
1 floppy-drive cable