Installing a floppy drive – Dell OptiPlex GX260 User Manual

Page 40

out of the sled.

Removing the Floppy Drive

1 sled tab
2 sled

Installing a Floppy Drive

1. Snap the replacement drive into the sled and ensure that it is secure in the sled.

2. Connect the interposer board to the floppy drive.

a. Slide the floppy-drive cable into the connector.

b. Close the lever so that the cable is secure in the connector.

c. Line up the hole on the bottom of the interposer board with the notch on the connector, and snap the interposer

board onto the drive.

3. Gently slide the drive into the computer until the tabs securely click into position.

Attaching the Floppy-Drive Cable