Dell Mellanox Family of Adapters - Manual (Page 89)

User Manual for Mellanox ConnectX®-3 10/40 Gigabit Ethernet Adapters for Dell PowerEdge Servers Rev 1.1
Mellanox Technologies 89
Table 17 - Mellanox ConnectX-3 Dual 10GbE SFP+ Network Adapter Specifications
Physical
Size: 2.71in. x 5.6in. (68.90 mm x 142.25 mm)
Full height Bracket Size: 3.8in (96.52 mm)
Low profile Bracket Size: 3.16in (80.3 mm)
Connector: SFP+ 10Gb/s
Protocol Support
Ethernet: 10GBASE-CR, 10GBASE-R, and 1000BASE-R
Data Rate:10Gb/s – Ethernet
PCI Express Gen3: SERDES @ 8.0GT/s, 8lanes (2.0 and 1.1 compatible)
Power and
Environmental
a
a. Thermal and power characteristics with optical modules only supported with Mellanox SFP+ optical mod-
ule, MFM1T02A-SR (Dell Part Number T16JY).
Voltage: 12V, 3.3V. 3.3V_AUX
Typ Power: Passive Cables: 4.84W
Optical Cables: 6.24W
Max Power: Passive Cables: 5.87W
Optical Cables: 7.87W
Temperature: Operational 0°C to 55°C
Non-operational 0°C to 70°C
Note: Thermal spec covers Power Level 1 SFP+ modules
Humidity: 90% relative humidity
b
b. For both operational and non-operational states
Air Flow: 100LFM
c
c. Air flow is measured ~1” from the heat sink between the heat sink and the cooling air inlet.
Regulatory
EMC: Refer to Chapter 9, “Regulatory,” on page 91
Safety: IEC/EN 60950-1:2006
ETSI EN 300 019-2-2
IEC 60068-2- 64, 29, 32
RoHS: RoHS-R6