beautypg.com

3 sles11 sp3, 1 configuring the iscsi target machine – Dell Mellanox Family of Adapters User Manual

Page 73

background image

User Manual for Mellanox ConnectX®-3 10/40 Gigabit Ethernet Adapters for Dell PowerEdge Servers

Rev 1.1

Mellanox Technologies

73

4. Choose the Operating System to install.

5. Run the Windows Setup Wizard.

6. Choose iSCSI target drive to install Windows and follow the instructions presented by the

installation Wizard.

Installation process will start once completing all the required steps in the Wizard, the Client will
reboot and will boot from the iSCSI target.

5.1.3

SLES11 SP3

5.1.3.1 Configuring the iSCSI Target Machine

To configure the iSCSI target:

Step 1.

Download the IET target software from.

http://sourceforge.net/projects/iscsitarget/files/iscsitarget/1.4.20.2/

See also other documents in the category Dell Computer hardware: