Replacing the palm rest, Procedure, Post-requisites – Dell Alienware 17 R2 (Early 2015) User Manual
Page 41

Replacing the palm rest
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Replace the
.
2 Replace the
.
3 Replace the
4 Replace the
.
5 Connect the power-button board cable to the system board.
6 Adhere the tape that secures the power-button board cable to the system
board.
7 Slide the keyboard cable, keyboard-backlight cable, macro-keys cable, and
macro-keys backlight cable through the slot on the computer base.
8 Align the palm-rest assembly on the computer base and snap it into place.
9 Close the display and turn the computer over.
10 Replace the screws that secure the palm-rest assembly to the computer
base.
11 Slide the keyboard cable, keyboard-backlight cable, macro-keys cable and
macro-keys backlight cable into their respective connectors and press
down the latches to secure the cables to the system board.
Post-requisites
Replace the
.
41