Replacing the display panel, Procedure, Post-requisites – Dell Alienware 17 R2 (Early 2015) User Manual
Page 108

Replacing the display panel
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1
Connect the display cable to the display panel and press down on the latch
to secure the cable.
2 Turn the display panel over.
3 Align the screw holes on the display panel with the screw holes on the
display back-cover.
4 Replace the screws that secure the display panel to the display back-cover.
Post-requisites
1
Replace the
.
2 Replace the
3 Follow the procedure from step 5 to step 11 in “Replacing the
”.
4 Replace the
5 Replace the
.
108