Dell 2355dn Multifunction Mono Laser Printer - Manual (Page 32)

Appendix C. Printing protocols 30
Appendix C. Printing protocols
Before setting the network printing ports, you must install the printer driver
with the local port (LPT) on the system. Refer to your printer/MFP user’s
guide.
Standard TCP/IP port
You can print your documents to your network printer by creating a Standard
TCP/IP port.
Configuring Standard TCP/IP in Windows 2000/XP/Server 2003/Server
2008/Vista/7/Server 2008 R2
You can enable or disable the Standard TCP/IP Printing port through EWS
(Embedded Web Service).
You can also change the port number of the Standard TCP/IP port. The
default port number is 9100.
Creating a Standard TCP/IP port
1 For Windows 2000, click the Start button Settings Printer.
For Windows XP/ Server 2003, click the
Start button and point to Printers
and Faxes.
For Windows Vista/Server 20008, click the
Start button and click Control
Panel Hardware and Sound Printers.
For Windows 7, click the
Start button and click Control Panel
Hardware and Sound Devices and Printers.
For Windows Server 2008 R2, click the
Start button and click Control
Panel Hardware Devices and Printers.
2 Click Add a printer or double-click Add Printer, and then Next.
3 Click Local printer attached to this computer or Local printer and then
Next.
Make sure that
Automatically detect and install my Plug and Play printer.
is not selected.
4 Click Create a new port, select Standard TCP/IP port from the Type of
port list, and click Next.
5 Click Next.