Using upnp – Dell 2355dn Multifunction Mono Laser Printer User Manual

Page 31

Appendix B. Management protocols

• Embedded Web Service (EWS): Select Printer Server Settings Print

Server Settings UPnP(SSDP).
–

Auto IP Enabled: You can enable or disable Auto IP. When this option

is selected, the network print server cannot find the control point and

receive an IP address from the control point. The network print server

will create an IP address of “169.254.XXX.XXX.”

–

Multicast DNS Enabled: SSDP can use Multicast DNS.

–

SSDP Enabled: You can enable or disable SSDP.

–

SSDP TTL: You can specify the maximum number of subnets that

SSPD multicasts can travel across.

Using UPnP

If SSDP (Simple Service Discovery Protocol) is enabled, your network print

server is checked by a control point. This control point is an application which

supports finding UPnP devices. Information on searching and control

functions or your network print server’s device information is displayed in an

XML page (http://xxx.xxx.xxx.xxx:5200/printer.xml).