Method 1 – Dell 2355dn Multifunction Mono Laser Printer User Manual
Page 12
10
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn
Method 1:
The Dell Internal Wireless Adapter can be configured at the printer's operator
panel. This method only supports open network systems, WEP network
security and WPA network security.
1
Navigate to the Wireless sub menu on the printer's Operator Panel
For Dell 5330dn Mono Laser:
a
Press Menu ( ).
b
Press Scroll ( or ) to highlight Network I/O Ports and press
Select ( ).
c
Press Scroll ( or ) to highlight Wireless and press Select ( ).
For Dell 2335dn MFP:
a
On the main menu of the operator panel, scroll to Setup using
Scroll ( or ) and press Select ( ).
b
On the Setup menu, scroll to Network Setup using Scroll ( or )
and press
Select ( ).
c
On the Network Setup menu, scroll to Wireless using Scroll ( or
) and press
Select ( ).
For Dell 2355dn Laser MFP:
a
Press Setup Machine Setup from the home screen.
b
Press the Next (
) button.
c
Press the up/down arrows to select Network Setup.
d
Press the up/down arrows to select Wireless.
2
Press Scroll ( or ) to highlight WLAN Settings and press Select ( ).
For Dell 2355dn Laser MFP:
Press
WLAN Settings.
3
Configure the Dell Internal Wireless Adapter based on your wireless
network and network security requirements.
This method supports two modes.
Either;
•
Search List: Automatically displays a list of available networks and
prompts for the security key (if applicable).