Dell POWERVAULT MD3620I - Manual (Page 33)

Installing PowerVault MD Storage Software 33
2 Select Install MD Storage Software.
3 Read and accept the license agreement.
4 Select one of the following installation options from the Install Set
dropdown menu:
• Full (recommended)—Installs the MD Storage Manager (client)
software, host-based storage agent, multipath driver, and hardware
providers.
• Host Only—Installs the host-based storage agent and multipath
drivers.
• Management—Installs the management software and hardware
providers.
• Custom—Allows you to select specific components.
5 Select the PowerVault MD storage array model(s) you are setting up to
serve as data storage for this host server.
6 Choose whether to start the event monitor service automatically when the
host server reboots or manually.
NOTE: This option is applicable only to Windows client software installation.
7 Confirm the installation location and choose Install.
8 If prompted, reboot the host server after the installation completes.
9 When the reboot is complete, the MDCU may launch automatically. If
the MDCU does not launch automatically, launch it manually.
• In a Windows-based operating system, click
StartDellodular
Disk Configuration Utility.
• In a Linux-based operating system, double-click the Modular Disk
Configuration Utility icon on the desktop.
10 Start MD Storage Manager and discover the array(s).
11 If applicable, activate any premium features purchased with your storage
array. If you purchased premium features, see the printed activation card
shipped with your storage array.
book.book Page 33 Thursday, July 18, 2013 5:39 PM