Dell POWERVAULT MD3620I - Manual (Page 48)

48 Post Installation Tasks
2 Right-click the network connection you want to configure and select
Properties.
3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Use the following IP address and enter the IP address, subnet mask,
and default gateway addresses.
Using A DNS server
1 In the Control Panel, select Network connections or Network and Sharing
Center and then click Manage network connections.
2 Right-click the network connection you want to configure and select
Properties.
3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Obtain DNS server address automatically or enter the preferred
and alternate DNS server IP addresses and click OK.
Using A WINS Server
NOTE: If you are using a DHCP server to allocate WINS server IP addresses, you
do not need to add WINS server addresses.
1 In the Control Panel, select Network connections.
2 Right-click the network connection you want to configure and select
Properties.
3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Advanced WINS tab and click Add.
5 In the TCP/IP WINS server window, type the IP address of the WINS
server and click Add.
6 To enable use of the Lmhosts file to resolve remote NetBIOS names, select
Enable LMHOSTS lookup.
book.book Page 48 Thursday, July 18, 2013 5:39 PM