Dell XPS 410 (Mid 2007) - Manual (Page 47)

Optimizing Performance
47
Enabling the QRT Feature in System Setup
The QRT drivers must be installed before the Quick Resume feature becomes active. The QRT drivers
are installed when this option is ordered. Also, Quick Resume is enabled in system setup when this
feature is ordered.
1 Enter system setup (see "Entering System Setup" on page 127).
2 Press the arrow keys to highlight the Power Management menu option, then press to access
the menu.
3 Press the up- and down-arrow keys to highlight the Quick Resume option, then press to
access the menu.
4 Press the left- and right-arrow keys to highlight the On option, and then press to enable the
Quick Resume feature.
Enabling the QRT Feature in the Operating system
1 Click the Start button, then click Control Panel.
2 Click the Away tab.
3 Ensure that the check boxes for Enable away mode and Options are checked.
4 Click the Advanced tab.
5 From the When I press the power button on my computer drop-down menu, select Do Nothing.
6 From the When I press the sleep button on my computer drop-down menu, select Do Nothing.