Dell Latitude CPi A - Manual (Page 39)

Bay Device You Want to Install Procedure
Battery Diskette drive
Travel module 1. If your computer is docked, turn it off and
undock it.
2. Remove the battery.
3. Install the new device.
4. Dock the computer and turn it on, if
necessary.
Battery CD-ROM drive
LS-120 drive
Second hard-disk drive 1. Turn off and undock the computer.
2. Remove the battery.
3. Install the new device.
4. Dock the computer and turn it on.
CD-ROM drive Battery
Diskette drive
LS-120 drive
Second hard-disk drive
Travel module 1. Turn off and undock the computer.
2. Remove the CD-ROM drive.
3. Install the new device.
4. Dock the computer and turn it on.
Diskette drive Battery
Travel module 1. If your computer is docked, turn it off and
undock it.
2. Remove the diskette drive.
3. Install the new device.
4. Dock the computer and turn it on, if
necessary.
Diskette drive CD-ROM drive
LS-120 drive
Second hard-disk drive 1. Turn off and undock the computer.
2. Remove the diskette drive.
3. Install the new device.
4. Dock the computer and turn it on.
LS-120 drive Battery
CD-ROM drive
Diskette drive
Second hard-disk drive
Travel module 1. Turn off and undock the computer.
2. Remove the LS-120 drive.
3. Install the new device.
4. Dock the computer and turn it on.
Second hard-disk
drive Battery
CD-ROM drive
Diskette drive
LS-120 drive
Travel module 1. Turn off and undock the computer.
2. Remove the second hard-disk drive.
3. Install the new device.
4. Dock the computer and turn it on.
Travel module Battery
Diskette drive 1. If your computer is docked, turn it off and
undock it.
2. Remove the travel module.
3. Install the new device.