Dell Latitude CPi A - Manual (Page 187)

returns you to the Main menu.
Select
Select allows you to select individual test groups to tailor the testing process to your particular needs. You
can choose one or more test groups and run them sequentially or individually. When you choose Select, five
options are displayed: All, One, Clear All, Key-Help, and Quit Menu.
To select all the test groups, highlight All in the Select menu and press . To select an individual test
group, either press the up- or down-arrow key to highlight the test group and then press the Spacebar, or
highlight One in the Select menu and press .
To reverse a test group selection, highlight the test group and press the Spacebar. To clear all selected test
groups, select Clear All.
The Key-Help option displays a list of key controls available for the selected option. The Quit Menu option
returns you to the Main menu.
Subtest
Most of the test groups consist of several subtests. Use the Subtest option to select individual subtests
within the test group(s).
When you select Subtest, many of the same options as those on the Main menu are displayed: Run,
Select, Options, Test Limits, About, Key-Help, and Quit Menu. Each of these options is explained in the
following subsections.
Run (Under Subtest)
Run in the Subtest menu displays five options: One, Selected, All, Key-Help, and Quit Menu. If you select
One, only the highlighted subtest is run. If you choose Selected, only the selected subtests are run. If you
select All, every subtest in the selected test group is run. (The subtests are run in the order they are listed.)
The Key-Help option displays a list of available key controls. The Quit Menu option returns you to the
previous menu.
Select (Under Subtest)
Select in the Subtest menu allows you to select individual subtests to tailor the testing process to your
particular needs. You can choose one or more subtests from the list. When you choose Select, five options
are displayed: All, One, Clear All, Key-Help, and Quit Menu.
To select all the test groups, highlight All in the Select menu and press . To select an individual
subtest, either highlight the subtest and press the Spacebar or highlight One and press .
To reverse a subtest selection, highlight the subtest and press the Spacebar. To clear all selected subtests,
select Clear All.
The Key-Help option displays a list of available key controls. The Quit Menu option returns you to the
previous menu.