Dell Inspiron One 2320 (Mid 2011) - Manual (Page 35)

Rear Stand Cover 35
6
Rear-Stand Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
Removing the Rear-Stand Assembly
1 Follow the instructions in "Before You Begin" on page 11.
2 Remove the back cover. See "Removing the Back Cover" on page 19.
3 Remove the two screws that secure the rear-stand assembly to the chassis.
4 Slide the rear-stand assembly towards the bottom of the computer and lift
it away from the chassis.
book.book Page 35 Thursday, May 3, 2012 1:21 PM