Dell OptiPlex Gxi - Manual (Page 44)

2-14 Dell OptiPlex GX i Midsize Systems Reference and Installation Guide
R
esponding to Error Messages
If an error message appears on your monitor screen while
the system is booting, make a note of the message. Then,
before entering the System Setup program, refer to your
Diagnostics and Troubleshooting Guide
for an explana-
tion of the message and suggestions for correcting any
errors. (However, it is normal to receive an error message
the first time you boot the system after a memory
upgrade. In that case, you do not need to refer to the
Diagnostics and Troubleshooting Guide
; instead refer to
the instructions in “Performing a Memory Upgrade” in
Chapter 6 of this guide.)
If you are given an option of pressing either < F1 > to con-
tinue or < F2 > to run the System Setup program, press the
< F2 > key.