Dell C5765DN MFP Color Laser Printer - Manual (Page 58)

3 Copy
58
2
Select [Change Quantity].
3
Specify the number of copy sets with the numeric keypad.
The new quantity must include the number of copies that have already been printed. You
cannot enter a number less than the number of copies that have already been printed.
4
Press the button.
Note • If you enter the same value as the number of copies that have already been printed, the machine will
not execute a copy job even when you press the button.
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
Note • Press the button only after all the documents have been scanned. The machine does not
accept another job while it is scanning the documents, or when [Next Original] has been selected.
1
Press the button.
The button lights up to indicate
that the machine is in the Interrupt mode.
2
Load a document and set features if necessary.
3
Specify the number of copy sets with the numeric keypad.
4
Press the button.
5
After you have finished making the interrupt copy, press the button.
The button goes out to indicate that the Interrupt mode is exited.
Note • If you used the document glass to copy the document, remove the document from the document glass.
6
Press the button.
The suspended copy job is resumed.
button