Dell XPS 730x H2C (Early 2009) - Manual (Page 53)

Configuring the BIOS
53
Configuring the BIOS
System Setup
The System Setup options allow you to:
• Change the system configuration information after you add, change,
or remove any hardware in your computer.
• Set or change a user-selectable option.
• Read the current amount of memory or set the type of hard drive installed.
Before you use System Setup, it is recommended that you write down the
current System Setup information for future reference.
CAUTION:
Do not change the settings in System Setup unless you are an expert
computer user. Certain changes can cause your computer to work incorrectly.
Entering System Setup
1 Turn on (or restart) your computer.
2 When the DELL™ logo appears, press immediately.
NOTE:
Keyboard failure may result when a key on the keyboard is held down
for extended periods of time. To avoid possible keyboard failure, press and
release in even intervals until the System Setup screen appears.
If you wait too long and the operating system logo appears, continue to
wait until you see the Microsoft
®
Windows
®
desktop, then shut down
your computer and try again.
book.book Page 53 Monday, November 10, 2008 1:26 PM