Dell 3000cn Color Laser Printer - Manual (Page 26)

TCP/IP
Settings
Host Name Specifies the host name up to 15 alphanumeric characters. The default name will remain
valid if no entry is made.
IP
Address
Mode
AutoIP Automatically sets the IP address.
DHCP Uses DHCP to set the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
Manually
Set
Enables the IP address set in IP Address.
IP Address Sets the IP address allocated to the printer in the nnn.nnn.nnn.nnn format. Each section
of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254
are not valid for the first three-digits.
Subnet Mask Sets the subnet mask in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is
a value between 0 and 255. Note that 255.255.255.255 is invalid.
Gateway Address Sets the gateway address in the nnn.nnn.nnn.nnn format. Each section of
nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are
not valid for the first three-digits.
DNS DNS Mode Select the check box to get the DNS server address automatically from the DHCP server.
DNS Server ADDR Sets the DNS server address.
LPD Connection Time-
Out
Sets the connection timeout period from 1 to 1000 seconds.
IP Filter To set the IP Filter settings, click IP Filter. The " IP Filter " page is displayed.
Port9100 Port Number Sets the port number from 9000 to 9999.
Connection Time-
Out
Sets the connection timeout period between 1 and 1000 seconds.
IP Filter To set the IP Filter settings, click IP Filter. The " IP Filter " page is displayed.
HTTP Port Number Sets the port number to 80 and 9000 to 9999.
Simultaneous
Connections
Displays the maximum number of connections received simultaneously by the client.
Connection Time-
Out
Sets the connection timeout period from 1 to 255 seconds.
FTP Password Sets whether to enable or disable the password. And also specifies the password value up
to seven characters.
Connection Time-
Out
Sets the connection timeout period from 1 to 1000 seconds.
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the Left Frame.
Values: