Replacing the system board – Dell Inspiron One 19 Touch (Late 2009) User Manual
Page 56
Replacing the System Board
1.
Follow the procedures in
Before You Begin
.
2.
Align the screw holes on the system board with the screw holes on the chassis.
3.
Replace the four screws that secure the system board to the chassis.
4.
Connect all the cables to the system board.
5.
Replace the processor (see
Replacing the Processor
).
6.
Replace the processor heat sink (see
Replacing the Processor Heat Sink
).
7.
Replace the coin-cell battery (see
Replacing the Coin-Cell Battery
).
8.
Replace the Mini-Card (see
Replacing the Mini-Card
).
9.
Replace the memory module(s) (see
Replacing Memory Module(s)
).
10.
Replace the system-board shield (see
Replacing the System-Board Shield
).
11.
Replace the inverter (see
Replacing the Inverter
).
12.
Replace the back metal shield (see
Replacing the Back Metal Shield
).
13.
Replace the I/O bracket (see
Replacing the I/O Bracket
).
14.
Replace the back cover (see
Replacing the Back Cover
).
15.
Replace the display bezel (see
Replacing the Display Bezel
).
16.
Replace the speaker cover (see
Replacing the Speaker Cover
).
17.
Replace the decorative cover (see
Replacing the Decorative Cover
).
18.
Replace the optical drive (see
Replacing the Optical Drive
).
19.
Replace the computer stand (see
Replacing the Computer Stand
).
20.
Replace the I/O cover (see
Replacing the I/O Cover
).
21.
Turn on the computer.
1
system board
2
screws (4)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.