Replacing the heat-sink fans – Dell Inspiron One 19 Touch (Late 2009) User Manual
Page 26
Replacing the Heat-Sink Fans
1.
Follow the procedures in
Before You Begin
.
2.
Align the screw holes on the heat-sink fans with the screw holes on the chassis. Replace the four screws that secure the heat-sink fans to the chassis.
3.
Route the heat-sink fan cables through the routing guides on the chassis.
4.
Connect the heat-sink fan cables to the connectors on the system board.
5.
Replace the processor heat sink (see
Replacing the Processor Heat Sink
).
6.
Replace the system-board shield (see
Replacing the System-Board Shield
).
7.
Replace the inverter (see
Replacing the Inverter
).
8.
Replace the I/O bracket (see
Replacing the I/O Bracket
).
9.
Replace the back cover (see
Replacing the Back Cover
).
10.
Replace the display bezel (see
Replacing the Display Bezel
).
11.
Replace the speaker cover (see
Replacing the Speaker Cover
).
12.
Replace the decorative cover (see
Replacing the Decorative Cover
).
13.
Replace the optical drive (see
Replacing the Optical Drive
).
14.
Replace the computer stand (see
Replacing the Computer Stand
).
15.
Replace the I/O cover (see
Replacing the I/O Cover
).
16.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
1
heat-sink fans (2)
2
screws (4)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.