Canon MF5550 User Manual
Page 97
Index
9-5
Appendix
9
R
Receive Mode key, 1-2
Receive Mode settings, 5-1
RECEIVED IN MEMORY message, 7-3
Receiving
automatically, 5-2
canceling, 5-8
in memory when a problem occurs, 5-7
manually, 5-3
problems, 7-7
when an answering machine is connected, 5-3
while performing other tasks, 5-6
REDIAL INTERVAL setting, 8-6
Redial key, 1-3
REDIAL TIMES setting, 8-6
Redialing
automatically, 4-10
manually, 4-10
Registering
coded speed dialing, 3-4
fax/telephone number/name, 2-4
group dialing, 3-6
one-touch speed dialing, 3-2
sender information, 2-3
REMOVE MP PAPER message, 7-3
REPORT SETTINGS settings, 8-5
Reset key, 1-3
RING COUNT setting, 8-6
Ring patterns, 5-5
ROTARY PULSE setting, 8-5
RX (Reception) REPORT
description, 6-1, 8-5
setting, 6-6
RX REPORT setting, 8-5
RX SETTINGS settings, 8-6
RX TO MEMORY setting, 8-7
S
SCAN DENSITY setting, 8-7
SELECT A4/LTR/LGL message, 7-3
Sender information
Sending
manual, 4-3
memory, 4-1
methods, 4-1
problems, 7-5
sequential broadcasting, 4-12
Sequential broadcasting, 4-12
Set key, 1-3
Specifications, 9-1
SPEED DIAL LIST setting, 8-8
Speed dialing
coded, 3-1, 3-4
description, 3-1
group, 3-1, 3-6
lists, 3-9
methods, 3-1
one-touch, 3-1, 3-2
Standby display, 1-4
Start key, 1-3
Status Monitor key, 1-3
Stop/Reset key, 1-3
Support, customer, 1-1
Symbols, entering, 2-1
SYSTEM SETTINGS settings, 8-3
T
TEL LINE TYPE setting, 8-5
TEL# REGISTRATION settings, 8-4
Telephone line type setting, 2-6
Telephone problems, 7-11
Time, entering, 2-4
TONER SAVER MODE setting, 8-3
TONER SUPPLY LOW setting, 8-7
TOUCH TONE setting, 8-5
Transparencies, 8-3
Troubleshooting, 7-1
TTI POSITION setting, 8-5
TX (Transmission) REPORT
description, 6-1, 8-5
setting, 6-4
TX LIMIT REACHED message, 7-3
TX REPORT setting, 8-5
TX SETTINGS settings, 8-6