Canon MF5550 - Manual (Page 56)

Setting the Receive Mode 5-2
Receiving F
a
x
e
s
5
NOTE
• If you set <3. MAN/AUTO SWITCH> to in of the Menu, the
machine will receive faxes automatically even when the receive mode is set to MODE>. (See <3. MAN/AUTO SWITCH> of "Menu Descriptions," on p. 8-6.)
• When you want to use DRPD, check with your local telephone company if the distinctive
ringer pattern service is available in your area.
3
Press [Set].
Receiving Faxes Automatically: FAX ONLY MODE
If you want to select , check the following:
■ Select This Mode If:
• you have a dedicated telephone line for fax use only.
• you only want to receive faxes automatically with the machine.
■ You Will Need to:
• set . (See "Setting the Receive Mode," on p. 5-1.)
• connect the machine to a dedicated telephone line. (See "Connect the telephone cable
and any necessary external device," in the Set-Up Sheet.)
■ When You Receive a Fax Call
The machine will receive the fax automatically.
NOTE
• The machine does not ring when it receives a fax call. If you connect a telephone to the
machine and enable the setting, the telephone will ring when the
machine receives a fax call.
• You can select the number of rings before the machine receives faxes. (See <2.
INCOMING RING> of "Menu Descriptions," on p. 8-6.)
■ When You Receive a Voice Call
You will not be able to answer the call.
1 2 / 0 3 / 2 0 0 3 W E D 1 5 : 1 0
F a x O n l y F I N E
Ex: