Dell PowerVault 221S (SCSI) - Manual (Page 13)

Rack Installation Guide 1-9
Installing the VersaRails Mounting Rails
NOTE: If you have already installed RapidRails mounting rails, skip this section.
1 At the front of the rack cabinet, position one of the mounting rails so that its
mounting-bracket flange fits at the location you have selected in the rack (see
Figure 1-6).
The vertical rail holes in rack cabinets may be round or square.
F i g u r e 1 - 6 . I n s t a l l i n g t h e Ve r s a Ra i l s M o u n t i n g R a i l s
2 Push the mounting rail forward until the mounting holes are aligned with the holes on
the front vertical rail.
3 Using two 10-32 x 0.5 Phillips screws, secure the front mounting-bracket flange to the
front vertical rail.
4 At the back of the cabinet, pull back on the back mounting-bracket flange until it is
aligned with the holes on the back vertical rail.
front of rack
VersaRails mounting rail (2)
vertical rail
holes may be
round or square
mounting-bracket flange
mounting holes (2)