Canon ds6041 - Manual (Page 94)

94
Image Protection
You can protect images to prevent accidental erasure.
Select [Protect].
•
Select the <]> tab.
•
Press the <å> keys to select
[Protect], then press < p >.
s The protect setting screen will appear.
1
Set the image protection.
•
Press the <µ> keys to select the
image to be protected, then press
.
s When an image is protected, the < ¬ >
icon will appear below the image.
•
To cancel the image protection, press
< p > again. The < ¬ > icon will
disappear.
•
To protect another image, repeat step
2
.
•
To quit the image protection, press the
< m > button. The menu will
reappear.
2
Image protection icon
•
Once an image is protected, it cannot be removed by the camera’s
Erase function.
To erase a protected image, you must first remove the protection.
•
If you erase all the images (p.96), only the protected images will
remain. This is convenient when you want to erase unnecessary
images all at once.
•
Image protection can also be set in the image information, magnified
view, and index display modes.