Canon ds6041 - Manual (Page 83)

83
Using the Built-in Flash
FE (flash exposure) lock obtains and locks the correct flash exposure
reading for any part of a subject. It works in Creative Zone modes.
j FE Lock
Focus on the subject.
•
Press the shutter button halfway. Keep
pressing the shutter button halfway
until step
4
.
2
Check that the < M > icon is lit.
•
Press the < M > button to pop-up the
built-in flash.
•
In the viewfinder, check that the < M >
icon is lit.
1
Press the < j> button. ( √ )
•
Aim the viewfinder center over the
subject where you want to lock the
flash exposure, then press the < j>
button.
s A preflash will fire and the icon
will light in the viewfinder.
•
Hold down the button.
3
Shoot.
•
Compose the shot and press the
shutter button fully.
4
If the subject is too far away and beyond the effective range of the flash,
the < M > icon will blink. Get closer to the subject and repeat steps
2
to
4
.