Canon ds6041 - Manual (Page 66)

66
TProgram AE
Like < Y> (Full Auto) mode, this is a
general-purpose shooting mode. The
camera automatically sets the shutter
speed and aperture value to suit the
scene’s brightness. This is called Program
AE.
∗ T stands for Program
∗ AE stands for Auto Exposure
Set the Mode Dial to < T>. 1
Focus on the subject.
•
Look through the viewfinder and aim
any AF point over the subject. Then
press the shutter button halfway.
2
Shoot.
•
Compose the shot and press the
shutter button fully.
4
AF point
Shutter speed
Aperture value
Check the display.
s The shutter speed and aperture value
will be set automatically and displayed
in the viewfinder and on the LCD
panel.
•
A correct exposure will be obtained as
long as the shutter speed and aperture
value display do not blink.
3