Canon ds6041 - Manual (Page 101)

101
Turn the camera’s power switch to
< 1 >, then press the < ] >
button.
s The image will be displayed, and the
<å> or <ß> icon will appear on the
upper left.
5
Indicates that a card photo
printer is connected.
BJ printer-connected icon
Direct Printing
•
For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the
camera is recommended.
•
If a battery pack will be used to power the camera, be sure to fully
recharge it first. While printing, monitor the battery level.
•
Before disconnecting the cable from the camera’s <œ> terminal,
turn off both the camera and printer. Then grasp and pull the connector
(not the cord) to disconnect it.
•
Do not use any cable other than the dedicated interface cable to
connect the camera and printer.
If the camera is connected to the printer and you do not operate it for
approx. 6 minutes, the camera power will turn off automatically. However, if
the auto power off (p.30) time is longer than 8 minutes, then that setting will
take effect instead.