Baumer N 140 - Manual

Baumer IVO GmbH & Co. KG 05.11 • 171.01.265/4
Dauchinger Strasse 58-62 • DE-78056 Villingen-Schwenningen Subject to modification
Phone +49 (0)7720 942-0 • Fax +49 (0)7720 942-900 in technic and design.
www.baumer.com • [email protected]
Operating instructions
Interface Description
N 140 Spindle Positioning Display (SPA)
Software 01 Version 3.10 and up
Contents Page
1. General information 2
1.1. Safety precautions 2
1.2. SPA description and explanation 3
2. Terminal assignment 4
3. Interface 5
3.1. Interface data 5
3.2. Protocol 5
3.3. Redundancy check (CRC byte) 5
3.4. Broadcast commands 6
3.5. Data saving 6
4. Command explanations 6
4.1. General information 6
4.2. Operating commands 6
4.3. Parameter commands 11
4.4. Identifier commands 14
4.5. Specific commands 15
5. Error warnings 17
5.1. CRC error 17
5.2. Format error 17
6. Overview on commands 17
7. Technical data 18
7.1. Dimensions 19
8. Part number 19