Baumer TE2 - Manual (Page 3)

Page 3 Design and specifications subject to change without notice
Installation Manual www.baumer.com/process
Note:
Disconnect loop supply before
connecting the FlexProgrammer
to the transmitter
.
1
2
1
2
TE2 with integrated
transmitter
Configuration with FlexProgrammer
In the following description the TE2 with an integrated transmitter and
the TE1 with a FlexTop temperature transmitter will be referred to as
“transmitter”.
The transmitter can be configured, using the 4...20 mA cable. The
maximum distance depends on the cable type, resistance and ca-
pacity. We recommend to use screened cables.
To be able to configure the transmitter with the FlexProgrammer the
dedicated software, FlexProgram, must be loaded on the PC.
The Flex-program has help menus for all functions. During the configuration the new data are, by means of the FlexPro-
grammer, transferred from the PC to the transmitter, in which they are
stored in the internal memory.
The indication for a correct configuration sequence is:
TE1: The LED on the FlexTop lights up constantly.
TE2: The transmitter has no indication.
Note: During the first power-up after a configuration the power-on time
increases to approx. 10 sec.
1
2
2
1
FlexTop
transmitter
1
2
Brown
White Adapter cable for TE2 with integrated transmitter
Note: Ambient temperature range 0...50°C
FlexProgrammer 9701
1
2
Red clip
Black clip
TE1x-4
G1/2A (hygienic with a dedicated welding part)
Samples of Product Types
M12 (hygienic with a dedicated welding part)
TE2x-4 TE1x-5 TE2x-6 TE2x-5