CITIZEN CBM-270 User Manual
Page 22
CBM-270 User’s Manual
CITIZEN
22
4444.... O
O
O
OP
PP
PER
ER
ER
ERA
A
A
AT
TT
TIIIIO
O
O
ON
N
N
N
4444....1111
C
C
C
Coooonn
nn
nn
nneeeeccccttttiiiinnnng
g
g
g AC
AC
AC
AC A
A
A
Addddaaaapppptttteeeerrrr
1. Turn off the power.
2. Connect the cable connector of the AC adapter to the power connector located on the back of
the printer.
3. Connect the AC power cord of the AC adapter, and plug it into a socket.
C
C
C
CA
A
A
AU
U
U
UT
TT
TIIIIO
O
O
ON
N
N
N::::
1) Use only the specified AC adapter.
2) When disconnecting/reconnecting the cable connector of the AC adapter, be sure to hold the
connector.
3) Separate the AC adapter from other noise-generating devices.
4) Pulling the AC power cord may damage it, resulting in a fire, electric shock, or snapping.
5) If a thunder/lightning storm is nearby, disconnect the AC adapter from the socket and do not
use the printer, because a fire or electric shock may occur.
6) Do not put the AC power cord close to a heating device. Its coating can melt and cause a fire
or electric shock.
7) Install the printer in a well-ventilated place, because the AC adapter generates heat when it is
used.
8) Use the specified AC power source. Connect to a power source with sufficient capacity. If
the capacity is insufficient, a fire may result from heat generation.
9) After using the printer or when not using it for a long period of time, be sure to unplug the AC
adapter from a plug socket for your safety.