Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 99)

Viewing A Specific Message
1. Press “View” next to the contact name/phone number
of the message you want to be displayed.
OR
Say “Show message n”
n = the number of the message
Listening To A Message
1. Press “Listen” on the touchscreen or push the “Phone”
button on the steering wheel and say “Listen,” the
Uconnect® system will read the received text message
over the vehicle audio system.
Barge-In
Barge-in is a feature that enables a user to say a valid
command without waiting for the system to finish speaking.
When the system is “speaking” you can push the
button
on the steering wheel and say a valid command.
For example, if the system is explaining all of the options
available after dictating a text message, at any time the
user can press
ЉListenЉ on touchscreen or push the
ЉPhoneЉ button on the steering wheel and say ЉListen.Љ
Requirements
• (MAP may not be compatible with Apple iPhones® (pre
iOS 6). Apple iOS 6 supports receiving text messages, but
does not support sending text messages).
• Available on vehicles sold in the United States with a
Uconnect® 8.4A (sales code RA3) or Uconnect® 8.4AN
(sales code RA4) radio equipped with Uconnect® Access.
• Vehicle must be registered with an active Uconnect®
Access Advantage trial or paid subscription for free
form text response to work.
• Vehicle and phone must be in range of the cellular
network.
98 ALL ABOUT Uconnect® ACCESS