Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 177)

Seek And Direct Tune Functions
The Seek Up and Down functions are activated by
touching the double arrow soft-keys to the right and left
of the radio station display, or by pressing the left
Steering Wheel Audio Control (if equipped) up or down.
Seek Up – Touch and release the Seek Up soft-key to tune
the radio to the next listenable station or channel. During
a Seek Up function, if the radio reaches the starting
station after passing through the entire band two times,
the radio will stop at the station where it began.
Fast Seek Up – Touch and hold the Seek Up soft-key to
advance the radio through the available stations or
channels at a faster rate, the radio stops at the next
available station or channel when the soft-key is released.
Seek Down – Touch and release the Seek Down soft-key
to tune the radio to the next listenable station or channel.
During a Seek Down function, if the radio reaches the
starting station after passing through the entire band two
times, the radio will stop at the station where it began.
Fast Seek Down – Touch and hold the Seek Down
soft-key to advance the radio through the available
stations or channel at a faster rate, the radio stops at the
next available station or channel when the soft-key is
released.
Direct Tune
Press the Tune soft-key located at the bottom of the radio
screen. The Direct Tune soft-key screen is available in
AM, FM, and SXM radio modes and can be used to direct
tune the radio to a desired station or channel.
Press the available number soft-key to begin selecting a
desired station. Once a number has been entered, any
numbers that are no longer possible (stations that cannot
be reached) will become deactivated/grayed out.
176 Uconnect® 8.4A