Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 257)

Copy device information to USB? (If Equipped)
Touch this soft-key to copy your radio information to a
USB jump drive through the available USB port.
Settings — Map Setup
With the Map displayed, touch the Options soft-key, then
touch the Settings soft-key and then the Map Setup
soft-key. You can also access this menu by touching the
Settings soft-key in the lower right of the Nav Main
Menu.
The following Map Setup options are available.
Orientation
Touch this soft-key to change how the Map Orientation is
displayed. Touch the desired soft-key.
• North Up
• Heading Up
Current Street
Touch this soft-key to turn on/off the current street
display on the lower center of the Map View. Touch and
release the soft-key until a check-mark appears, showing
the setting has been selected.
Destination Information
Touch this soft-key to change the Destination Information
that is displayed in the upper right corner of the Map
View. Touch the desired soft-key.
• Time of Arrival
• Time to Destination
• Distance
256 Uconnect® 8.4A