Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 115)

4. The Uconnect® Access App will confirm if your
command was sent (or not). Press “OK” to close the
pop-up screen.
5. It will take a little while for the command to go
through to your vehicle. The time it takes depends on
a number of technical conditions
6. A message will appear on the screen to let you know
if the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website (mop-
arownerconnect.com) using the username and pass-
word you used when registering your Uconnect®
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered
into the Mopar Owner Connect website
(moparownerconnect.com), select the vehicle you
want to send the command by clicking on its image
along the top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To turn on the horn and lights, press the
“trumpet icon.” To turn off the horn and lights, press the
“trumpet icon” again.
114 ALL ABOUT Uconnect® ACCESS