Uick, Pecs, Options – Compaq GS60E User Manual

Page 9: Compaq alphaserver gs60e

UICK

PECS

Options

DA-10352-00A-001

Compaq AlphaServer GS60E

MEMORY CHANNEL (continued)

OpenVMS Systems (continued)
In cases where nodes must be separated by a longer

distance than standard copper cables allow, the

CCMFB option converts the output of the standard

CCMAB controller or CCMLB line card to single-

mode fiber optic cable. The fiber optic connection

may be up to 2,000 meters long between two

CCMAB controllers connected in virtual hub mode,

or 3,000 meters between a CCMAB controller and

a CCMHB hub. (The connection from the CCMHB

hub to a second system may also be 3,000

meters). The CCMFB option requires a second

PCI slot in the system from which it draws power

only. It is normally connected to the corresponding

CCMAB controller with the short BN39B-01 cable.

The CCMFB is also used in the CCMHB hub

where it occupies a slot normally used by the

CCMLB line card, limiting expansion to four radial

fiber optic connections.

The CCMHB-BA hub expansion box provides

additional slots for up to eight fiber optic

connections. Two standard length, single-mode

fiber optic cables are available (BN34R-10 and

BN34R-31); however, users normally provide this

connection. Customers should reference the

TIA/EIA 568-A Commercial Building

Telecommunications Cabling Standard, Section

12.3.4. Fiber optic connectivity is completely

transparent to the systems using it and has no

performance impact.

MEMORY CHANNEL Controller
PCI System Area Network

controller, maximum of two

CCMAB-AA

System Area Network hub with four

line cards; includes BN19P-2E

power cord for Canada, Japan,

and U.S. operations; country-

specific power cord for other

regions is required.

CCMHB-AA

MEMORY CHANNEL hub

expansion box with no line cards

CCMHB-BA

Expansion line card for CCMHB

hub

CCMLB-AA

1-m cable for CCMAB and CCMHB

BN39B-01

4-m cable for CCMAB and CCMHB

BN39B-04

10-m cable for CCMAB and

CCMHB

BN39B-10

Copper-to-single mode fiber optic

converter

CCMFB-AA

TruCluster Production Server

Software for Tru64 UNIX

QB-3RLAG-AA

Tru64 UNIX Driver for MEMORY

CHANNEL license

QB-4ZCAG-AA

OpenVMS Cluster license for Alpha

systems

QL-MUZAG-AA

MEMORY CHANNEL (continued)

MEMORY CHANNEL Power Cords
Ireland, United Kingdom

BN19A-2E

Egypt, India

BN19S-2E

Central Europe

BN19C-2E

Israel

BN18L-2E

Switzerland

BN19E-2E

Italy

BN19M-2E

Denmark

BN19K-2E

Australia, New Zealand

BN19H-2E

Console Terminal

VT console terminal with EIA-232 25-pin DSUB

connector is required, (even with KFE72 installed)

for system power-up, diagnostics and console

display, order unless otherwise available.

Shielded console cable included for connection to

console terminal.

VT510 terminal

VT510-xx

Graphics Support for Tru64 UNIX

Graphics support for GS60E running Tru64 UNIX

V4.0E or later can be provided through combined

use of

3X-KFE72-LA port option and SN-PBXGB-AA

graphics adapter.

SN-PBXGB-AA requires 17

″

or 21

″

Professional

Series monitor and keyboard for graphics support,

unless available on-site

Selection of video extension cable and country-

specific power cord is required for all monitor

variants.

Graphics console subsystem for

Tru64 UNIX systems, includes

diskette drive and mouse.

3X-KFE72-LA

PowerStorm 3D30 2D/3D graphics

adapter

SN-PBXGB-AA

Monitors

″

(16

″

viewable image size)

professional series auto-

scanning color monitor, Trinitron

CRT, 0.25 mm aperture grill

pitch, VGA to 1280 x 1024 at 75

Hz, TCO 95, MPR-II, Energy

Star, attached

1.8-m video cable; requires

video extension cable and

country-specific power cord;

Northern Hemisphere without

power cord

SN-VRQP7-24

Same as above except Southern

Hemisphere without power cord

SN-VRQP7-23