Options, Uick, Pecs – Compaq GS60E User Manual

Page 4: Compaq alphaserver gs60e

UICK

PECS

Options

DA-10352-00A-001

Compaq AlphaServer GS60E

System requirements:

• GS60E requires Tru64 UNIX V4.0E or V4.0F or

OpenVMS V7.1-2 or V7.2-1.

• Software media and documentation for first

system on-site

• Serial console terminal
• Installation and/or startup services

Note: For system integration of any options with 6-3

part numbers, contact CustomSystems.

Processors (SMP Expansion)

Maximum two additional CPU modules per system

for a system total of three

All CPU modules must be at same speed on same

bus.

For systems with more than two processor modules,

a minimum of two memory modules is

recommended

Upgrades include processor module with Alpha

microprocessors, SMP extension license, and

end-user product warranty.

Dual-CPU module (Tru64 UNIX)

762P2-AX

Dual-CPU module (OpenVMS)

762P1-AX

Memory

Maximum 12-GB memory
1-GB and 2-GB memory modules have built in 2-way

interleaving; additional interleaving is

accomplished with the addition of more memory

modules.

4-GB memory modules have built in 4-way

interleaving; optimal performance is achieved

when two 2-GB modules are paired with one 4-

GB module or one

4-GB module is paired with another 4-GB module.

4-GB memory module

MS7CC-GA

2-GB memory module

MS7CC-FA

1-GB memory module

MS7CC-EA

I/O Expansion Buses

RETMA PCI shelf mount box for

system and I/O expansion

cabinets (included) with 12 PCI

slots and required cable for

connection to KFTHA-AA I/O

channel; maximum of two per

System Cabinet with one

StorageWorks shelf standard; see

“Expansion

−

System Cabinet and

I/O Expansion Cabinet” for more

details

DWLPB-DA

Graphics console subsystem and

diskette, includes two

asynchronous serial ports, parallel

port, keyboard and mouse ports,

diskette drive, extension cables for

video, keyboard, and mouse.

Note: Option required to support

KZPAC-AA/CA RAID

controllers

−

diskette drive is

required to run the RAID

Configuration Utility and to support

hardware partitioning.

3X-KFE72-LA

System I/O Modules

Systems support a maximum of 11 I/O channels with

three KFTHA-AA modules installed and no

internal storage, and 10 I/O channels with internal

storage.

System I/O module (included) with four

I/O channels for DWLPB-DA shelf

mount boxes, maximum three per

system

KFTHA-AA

Storage Controllers

PCI UltraSCSI Controllers
Tru64 UNIX V4.0E or later supports eight KZPBA-Cx

SCSI controllers per PCI, maximum of 64 per

system.

OpenVMS V7.1.2 or later supports eight KZPBA-Cx

SCSI controllers per PCI, maximum of 26 per

system.

Tape and optical devices are not supported with

KZPAC SCSI RAID controllers.

For cluster configurations, use Y cable (BN39A-0G)

or SCSI Hub (BA35X-03/05).

Manufacturing may substitute correct cable lengths

depending on configuration.

PCI Fibre Channel adapter (KGPSA-

BC) (uses one PCI slot); Tru64

V4.0F supports eight per PCI,

maximum eight per system,

OpenVMS V7.2-1 supports four per

PCI, maximum four per system;

requires Fibre Channel cable

380574-001

Fibre Channel cable (BNGBX-xx)

xx=02, 05, 15, 30, 50 meters

x=1, 2, 3, 4, 5

234457-B2x

PCI 1-port UltraSCSI Single-ended

host adapter (uses one PCI

slot)

−

included

KZPBA-CA

PCI 1-port UltraSCSI Differential host

adapter (uses one PCI slot);

OpenVMS V7.1-1H1 or later

supports multi-host SCSI clusters,

requires BN38C-xx cable

KZPBA-CB

1-m VHDCI male-to-68-pin HD male

UltraSCSI cable

x=01, 02, 03, 05 meters

BN38C-xx

PCI 1-port RAID (FWSE) controller

(UltraSCSI ready) with 4-MB cache

memory (uses one PCI slot) allows

RAID levels 0, 0+1, 1, and 5;

includes RAID Array 230/plus

subsystem software and

documentation kit;

3X-KFE72-LA option required to run

RCU; tape and optical drives not

supported; four per PCI, maximum

of four per system

KZPAC-AA