Hudson Robotics PlateCrane EX User Manual

Page 24

Text mode
Original mode

PlateCrane EX User Manual

Hudson Robotics, Inc.

2. Place the teach block onto the stack 1 position.

3. Using SoftLinx, open the setup screen for the PlateCrane. Click on New Point and

choose new stack, OR edit Stack 1.

4. Put the crane into limp mode by pressing and holding the limp button on the

Teach Pendant. The Teach Pendant will have a red LED light active once in limp
mode. If the light does not activate, ensure the Teach Pendant is connected and
reinitialize the crane via SoftLinx.