BMW 760Li Sedan 2008 - Manual (Page 108)

Climate
106
5. Turn the controller to adjust the tempera-
ture:
> Turn toward the left, toward blue: colder
> Turn toward the right, toward red:
warmer
6. Press the controller to save the setting.
Maximum cooling
Maximally cooled air is obtained as
quickly as possible at an outside
temperature of approx. 32
7 /0 6
and with the engine running.
The automatic climate control
changes over to the lowest temperature and
switches into the recirculated-air mode. The
maximum air quantity only flows out of the vents
for the upper body. So open these vents for
maximum cooling.
Air volume
You can vary the air volume by
turning. You can reactivate the
automatic air supply mode by
pressing the AUTO button.
Manual air distribution
You can adapt the air distribution to your own
personal preferences:
1. Open the start menu.
2. Open "Climate".
3. Turn the controller to select driver's side or
passenger side.
4. Select the desired field and press the con-
troller.
1 Air directed toward the windshield and side
windows
2 Air to the upper body
3 Air to footwell
You can only use the condensation sensor in
the AUTO program. Press the AUTO button
when you notice condensation on windows and
wish to take advantage of the condensation
sensor.
Defrosting windows and removing
condensation
Quickly remove ice and condensa-
tion from the windshield and front
side windows.
Also switch on the air conditioner.
Residual heat
The system uses the warmth
stored in the engine to heat the
interior when the ignition is off, e.g.
while the vehicle is stopped at a
school to pick up a child.
The function can be switched on when the fol-
lowing conditions are met:
> up to 15 minutes after switching off the
engine
> with the engine at operating temperature
> with sufficient battery voltage
> at an outside temperature below 77 7 /
25 6
The LED lights up when the function is
switched on.
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG