Cisco CIVS-IPC-2500 User Manual
Page 63
4-5
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 4 Viewing and Live Video
Viewing Video through the Home Window Overview
Snapshot button
Captures and saves a snapshot image of the current video image in the format and
location of your choice, and with the file name of your choice.
When you click this button, follow these steps to save the image:
1.
In the Snapshot window, click Save.
2.
In the Save Picture As window, enter the path and folder for the image, the file
name for the image, and the format (BMP or JPG) for the image, then click
Save.
Speaker Off
toggle button
Click the Speaker Off button to mute audio that is sent from the IP camera to the
PC that you are using. The button changes to the Speaker On button. Click the
Speaker On button to unmute audio. The button changes to the Speaker Off button.
These buttons appear if audio is enabled for the IP camera. For information about
enabling audio, see the
“Audio Window” section on page 3-17
.
Speaker On
toggle button
Speaker Volume
slider
Appears to the right of the Speaker On or Speaker Off button if audio is enabled for
the IP camera. When the speaker is unmuted, use this slider to adjust the volume at
which your PC speakers play the audio from the IP camera.
For information about enabling audio, see the
Microphone Off
toggle button
Click the Microphone Off button to mute the audio stream that is captured and sent
to the IP camera from the internal or external microphone of the PC that you are
using. When you click this button, the speaker that is attached to the IP camera does
not play audio that is transmitted from your PC.
Note
If you are simultaneously accessing other IP cameras in different browser
sessions on the same PC, clicking this button in one browser session does
not mute the audio that the PC sends to the other IP cameras.
When you click the Microphone Off button, it changes to the Microphone On
button. Click the Microphone On button to unmute audio that is sent to the IP
camera. The button changes to the Microphone Off button.
These buttons appear if half-duplex or full-duplex is enabled for audio. For
information about enabling half-duplex or full-duplex, see the
Microphone On
toggle button
Microphone
Sensitivity slider
Appears to the right of the Microphone On button or Microphone Off button if audio
is enabled for the IP camera. Use this slider to adjust the gain of the PC microphone
(that is, how sensitive it is to the audio that it picks up and that is sent to the IP
camera).
Table 4-1
Home Window Controls (continued)
Control
Description