Garmin Forerunner 405 CX - Manual (Page 9)

Forerunner 405CX Owner’s Manual
Getting Started
Bezel Tips
Touch the bezel firmly.
Touch the bezel on the outer ring,
where the words appear, not the
inner ring near the watch face.
Make each bezel selection a
separate action.
Do not rest your finger or thumb
on the bezel while using it.
Do not wear thick gloves while
using the bezel.
If the bezel is wet, wipe the bezel
dry before using it.
Locking the Bezel
To prevent accidental bezel taps (due
to moisture or inadvertent bumping),
press enter and quit simultaneously.
To unlock the bezel, press enter and
quit simultaneously again.
•
•
•
•
•
•
Power Save Mode
After a period of inactivity, the
Forerunner switches to power save
mode. The Forerunner is inactive
if the timer is not running, you are
not navigating to a destination and
viewing the navigation page, and
you have not pressed any buttons or
tapped the bezel.
While in power save mode, you
can view the time of day, turn on
the backlight, and use the ANT+ ™
computer connection. To exit power
save mode, press enter or quit . For
custom options, see page 13 .