Canon PowerShot SX30 IS - Manual (Page 84)

84
You can change the AF (Auto Focus) frame mode to match the scene you
want to shoot.
Choose [AF Frame].
● After pressing the n button, choose
[AF Frame] in the 4 tab, then press the
qr buttons to choose an option.
FlexiZone/Center
The AF frame is locked to the center. This is effective for focusing on a specific point.
In [FlexiZone], you can change the position and size of the AF frame (p. 85).
Face Detect
• Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (
only).
• When the camera is pointed at subjects, a white frame appears on the face
the camera judges to be the main subject, and gray frames (max. 2) will
appear on other faces.
• A frame will follow a moving subject within a certain range.
• When the shutter button is pressed halfway, up to 9 green frames will
appear on faces that the camera focuses on.
Changing the AF Frame Mode
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow and
will appear.
• If a face is not detected and only gray frames (no white frame) appear,
an AF Frame will appear in the center of the screen when you press the
shutter button halfway.
• The AF frame will appear in the center of the screen if you press the
shutter button halfway when Servo AF (p. 86) is set to [On] and a face is
not detected.
• Examples of faces that cannot be detected:
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
COP
Y