Cop y – Canon PowerShot SX30 IS User Manual

Page 162

Changing Shooting Function Settings

162

Registering Functions to the

Button

●

Choose [Set Shortcut button], then press
the

m button.

●

Press the

opqr buttons or turn the Â

dial to choose the functions to register,
then press the

m button.

●

Pressing the

button will call up the

registered function.

•

If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.

•

When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.

When shooting movies, if you press the zoom lever toward

j and zoom

out, the effect increases.

•

Choose

if you want to return the button to default settings.

•

When this

symbol is shown on the bottom right of an icon, the

function cannot be used in the current Shooting mode or function setting.

•

, each press of the

button records white balance data (p. 77),

and the white balance settings change to

•

%, each press of the

button will adjust and lock the focus, and

% will appear on the screen.

•

If you press the

button in

, both the screen and viewfinder

displays will turn off. Try one of the following to restore the displays:

•

Press any button other than the power button

•

Change the camera’s vertical or horizontal orientation

•

Open and close the screen

•

Raise and lower the flash

COP