Checking for shut eyes, Cop y – Canon PowerShot SX30 IS User Manual

Page 101

Checking for Shut Eyes

101

Make the setting.

●

Press the

qr buttons or turn the Â dial to

choose the amount of flash output, then
press the

m button.

Once set,

~ will appear on the screen.

When the camera detects the possibility that people have their eyes shut,

appears.

Choose [Blink Detection].

●

Press the

n button, then choose

[Blink Detection] in the

4 tab. Press the

qr buttons to choose [On].

Shoot.

When a person with shut eyes is detected,
a frame and

appear.

•

You can also set the flash output. Press the

n button and choose

[Flash Control] (p. 98) from the

4 tab. Then choose [Flash Output] and

press the

qr buttons to choose a setting.

•

M and B modes, you can set the flash output if you press the

n button and choose the 4 tab, then [Flash Control] and set the

[Flash Mode] option to [Manual].

•

When you press and hold the

h button for 1 sec. or more, or with the

flash raised, if you press the

h button and immediately press the n

button, the settings screen will appear.

Checking for Shut Eyes

•

$ mode, when the number of shots is set to two or more, this

function is only available for the last image shot.

•

and

modes, this function is only available for the last image

shot.

•

Not available in

W, ,

mode.

COP