Canon PowerShot SX30 IS - Manual (Page 67)

67
Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
Choose .
● Follow Steps 1 – 2 on p. 63 to choose ,
then press the l button.
● Press the qr buttons or turn the  dial to
choose , then press the l button.
Compose the shot and press the
shutter button halfway.
● Confirm that a green frame appears around
the face of the person who will wink.
Press the shutter button fully.
X The camera will enter shooting stand-by,
and [Wink to take picture] will appear on the
screen.
X The lamp will blink and the self-timer sound
will play.
Face the camera and wink.
X The shutter will release approximately 2
seconds after a wink is detected from the
person with a frame around the person’s face.
● To cancel the countdown, press the p
button.
Using the Wink Self-Timer
What if a wink is not detected?
• Wink a bit slowly.
• A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Changing the number of shots
After choosing in Step 1, press the op buttons.
COP
Y