Canon PowerShot SX30 IS - Manual (Page 159)

Changing Shooting Function Settings
159
Changing the Flash Timing
You can change the timing of the flash and shutter.
● Choose [Flash Control], then press the m
button.
● Press the op buttons or turn the  dial
to choose [Shutter Sync.], then press the
qr buttons to choose a setting.
Turning Off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Choose [Flash Control], then press the m
button.
● Press the op buttons or turn the  dial
to choose [Red-Eye Lamp], then press the
qr buttons to choose [Off].
Changing the Image Display Time Right After
Shooting
You can change the length of time the images display right after shooting.
● Choose [Review], then press the qr
buttons to choose an option.
1st-
curtain The flash fires right after the shutter
opens.
2nd-
curtain The flash fires right before the shutter
closes.
2 – 10 sec. Displays images for the set time.
Hold
The image displays until you press
the shutter button halfway.
Off Images will not display.
COP
Y