Canon EOS 30D - Manual (Page 95)

95
3 Auto Exposure Bracketing (AEB)N
Follow steps 1 and 2 to set the AEB
amount to <
>.
It will also be canceled if you set the
<4> switch to <2>, replace the
battery, replace the CF card, change
the lens, or attain flash ready.
Canceling AEB
Neither flash nor bulb exposures can be used with AEB.
If the drive mode is set to continuous (o/i), the three bracketed
shots will be taken continuously and then the shooting will stop
automatically. If the drive mode is set to single image (u), you must
press the shutter button three times.
If the self-timer has been set, the three bracketed shots will be taken
continuously.
If C.Fn-12 [Mirror lockup] is set to [1:Enabled] (p.172), the drive mode
for AEB will be single even if it is set to continuous.
AEB can be combined with exposure compensation.