Canon EOS 30D User Manual
Page 106
Using the Built-in Flash
106
In the same way as normal exposure compensation, you can set exposure compensation
for flash. You can set flash exposure compensation up to ±2 stops in 1/3-stop increments.
1
Press the <Q> button.
(9)
2
Set the exposure compensation amount.
While looking at the LCD panel or
viewfinder, turn the <5> dial.
To cancel the flash exposure
compensation, set the flash exposure
compensation amount back to
When you press the shutter button
halfway, the
in the viewfinder and on the LCD panel.
3
Take the picture.
y
Flash Exposure CompensationN
Increased exposure
Decreased exposure
Standard exposure index
Increased
exposure
Decreased exposure
Exposure level
mark
If you set flash exposure compensation with both the EX-series Speedlite and
camera, the Speedlite’s flash exposure compensation setting will override the
camera’s. If you set EX-series Speedlite’s flash exposure compensation with the
flash, any flash exposure compensation set with the camera will be overridden.
The exposure compensation amount will remain in effect even after the
<4> switch is set to <2>.
The procedure is the same when using an EX-series Speedlite. The
Speedlite’s flash exposure compensation can be set with the camera.